Make your own free website on Tripod.com

INSTALLING METER

 

OP.bmp (18238 bytes)

op1.bmp (18238 bytes)

To install Oil Pressure Meter, one way is to Oil Pressure Switch
and the other way is to Oil Block.

There are two ways of installing the oil pressure meter: use,
oil pressure switch or T-joint.

Accuracy is the same both Mechanical and Electrical type.

1. Advantage of Electrical Type

A. Installation is easier than Mechanical type.
B. When changed car, re-installation is easy.

2. Advantage of Mechanical Type

A. Less expensive than Electrical type.

ot.bmp (18238 bytes)

ot1.bmp (18238 bytes)

 

There are two method, one way is using Drain and the other way is using Oil Block.
(Omori parts P-150/350)

To install it to Drain Cook, some cars need Adopter to fit Drain Cook.

Accuracy is the same both Mechanical and Electrical type.

1. Advantage of Electrical Type

A. Installation is easier than Mechanical type.
B. When changed car, re-installation is easy.

2. Advantage of Mechanical Type

A. If engine stop, possible to measure Oil Temp.

tm.bmp (18238 bytes)

tm1.bmp (17334 bytes)

 

Tachometer is installed at fol.several different places
1. Ignition Coil, minus side.
2. At Computer Tachometer signal
3. Igniter
4. Coupler of Rotation signal

tm2.bmp (18238 bytes)

e.bmp (18238 bytes)

 

Exhaust Temp Meter is installed by making a hole with a screw thread at
exhaust concentrated area or welding adapter.

#-IMAGE COURTESY OF OMORI METER.JPN.

RETURN LINKS NEXT